-
ISO 15927-2 2009 Hygrothermal performance of buildings — Calculation and presentation of climatic data — Part 2 Hourly data for design cooling load.pdf
-
ISO 16000-13 2008 Indoor air — Part 13 Determination of total (gas and particle-phase) polychlorinated dioxin-like biphenyls (PCBs) and polychlorinated dibenzo.pdf
-
ISO 16000-16 2008 Indoor air — Part 16 Detection and enumeration of moulds — Sampling by.pdf
-
ISO 16110-2 2010 Hydrogen generators using fuel processing technologies — Part 2 Test methods for performance.pdf
-
ISO 16366 2008 Tools for pressing — L-shaped guides.pdf
-
ISO 16532-1 2008 Paper and board — Determination of grease resistance — Part 1 Permeability test.pdf
-
ISO 16663-1 2009 Fishing nets — Method of test for the determination of mesh size — Part 1 Opening of mesh.pdf
-
ISO 16869 2008 Plastics — Assessment of the effectiveness of fungistatic compounds in plastics formulations.pdf
-
ISO 16931 2009 Animal and vegetable fats and oils — Determination of polymerized triacylglycerols by high-performance size-exclusion chromatography (HPSEC).pdf
-
ISO 17267 2009 Intelligent transport systems — Navigation systems — Application programming interface (API).pdf
-
ISO 17484-2 2009 Plastics piping systems — Multilayer pipe systems for indoor gas installations — Part 2 Code of pratice.pdf
-
ISO 17512-1 2008 Soil quality — Avoidance test for determining the quality of soils and effects of chemicals on behaviour — Part 1 Test with earthworms (Eisenia fetida and Eisenia andrei).pdf
-
ISO 18117 2009 Surface chemical analysis — Handling of specimens prior to analysis.pdf
-
ISO 18352 2009 Carbon-fibre-reinforced plastics — Determination of compression-after-impact properties at a specified impact-energy level.pdf
-
ISO 1871 2009 Food and feed products — General guidelines for the determination of nitrogen by the Kjeldahl method.pdf
-
ISO 1890 2009 Reinforcement yarns — Determination of twist.pdf
-
ISO 18921 2008 Imaging materials — Compact discs (CD-ROM) — Method for estimating the life expectancy based on the effects of temperature and relative humidity.pdf
-
ISO 1920-8 2009 Testing of concrete — Part 8 Determination of drying shrinkage of concrete for samples prepared in the f.pdf
-
ISO 19252 2008 Plastics — Determination of scratch properties.pdf
-
ISO 19433 2008 Building construction machinery and equipment — Pedestrian-controlled vibratory plates — Terminology and commercial specifications.pdf
-
ISO 20072 2009 Aerosol drug delivery device design verification — Requirements and test methods.pdf
-
ISO 20369 2009 Material used for producing wrappings for cigarette filters, cigarettes and other tobacco products — Determination of citrate content.pdf
-
ISO 20565-1 2008 Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials (alternative to the X-ray fluorescence method) — Part 1.pdf
-
ISO 20665 2008 Water quality — Determination of chronic toxicity to Ceriodaphnia dubia.pdf
-
ISO 20898 2008 Industrial trucks — Electrical requirements.pdf
-
ISO 21003-1 2008 Multilayer piping systems for hot and cold water installations inside buildings — Part 1 General.pdf
-
ISO 21003-5 2008 Multilayer piping systems for hot and cold water installations inside buildings — Part 5 Fitness for purpose of the system.pdf
-
ISO 21068-1 2008 Chemical analysis of silicon-carbide-containing raw materials and refractory products — Part 1 General information and sample preparation.pdf
-
ISO 21227-4 2008 Paints and varnishes — Evaluation of defects on coated surfaces using optical imaging — Part 4 Evaluation of filiform corrosion.pdf
-
ISO 21289 2008 Mechanical vibration and shock — Parameters to be specified for the acquisition of vibration data.pdf
-
ISO 21531 2009 Dentistry — Graphical symbols for dental instruments.pdf
-
ISO 21614 2008 Determination of carbon content of UO2, (U, Gd)O2 and (U, Pu)O2 powders and sintered pellets — Combustion in a high-frequency induction.pdf
-
ISO 21627-3 2009 Plastics — Epoxy resins — Determination of chlorine content — Part 3 Total chlorine.pdf
-
ISO 21995 2008 Road vehicles — Test of vehicle air braking systems with a permissible mass of over 3,5 t — Acquisition and use of reference values using a roller brake tester.pdf
-
ISO 22108 2008 Space systems — Non-flight items in flight hardware — Identification and control.pdf
-
ISO 22307 2008 Financial services — Privacy impact assessment.pdf
-
ISO 22719 2008 Water quality — Determination of total alkalinity in sea water using high precision potentiometric titration.pdf
-
ISO 22840 2010 Intelligent transport systems — Devices to aid reverse manoeuvres — Extended-range backing aid systems (ERBA).pdf
-
ISO 23045 2008 Building environment design — Guidelines to assess energy efficiency of ne.pdf
-
ISO 23570-3 2009 Industrial automation systems and integration — Distributed installation in industrial applications — Part 3 Power distribution bus.pdf
-
ISO 23727 2009 Earth-moving machinery — Wheeled loader coupler for attachments.pdf
-
ISO 23830 2008 Surface chemical analysis — Secondary-ion mass spectrometry — Repeatability and constancy of the relative-intensity scale in static secondary-ion mass spectrometry.pdf
-
ISO 23868 2008 Document management — Monitoring and verification of information stored on 130 mm optical media.pdf
-
ISO 24011 2009 Resilient floor coverings — Specification for plain and decorative linoleum.pdf
-
ISO 24153 2009 Random sampling and randomization procedures.pdf
-
ISO 2439 2008 Flexible cellular polymeric materials — Determination of hardness (indentation technique).pdf
-
ISO 24454 2008 Rubber — Acquisition and presentation of comparable multi-point data.pdf
-
ISO 24557 2009 Pulses — Determination of moisture content — Air-oven method.pdf
-
ISO 24998 2008 Plastics laboratory ware — Single-use Petri dishes for microbiological procedures.pdf
-
ISO 25178-6 2010 Geometrical product specifications (GPS) — Surface texture Areal — Part 6 Classification of methods for measuring surface texture.pdf
-
ISO 25639-1 2008 Exhibitions, shows, fairs and conventions — Part 1 Vocabulary.pdf
-
ISO 25762 2009 Plastics — Guidance on the assessment of the fire characteristics and fire performance of fibre-reinforced polymer composites.pdf
-
ISO 26382 2010 Cogeneration systems — Technical declarations for planning, evaluation and procurement.pdf
-
ISO 26429-3 2008 Digital cinema (D-cinema) packaging — Part 3 Sound and picture track file.pdf
-
ISO 26429-7 2008 Digital cinema (D-cinema) packaging — Part 7 Composition playlist.pdf
-
ISO 26430-2 2008 Digital cinema (D-cinema) operations — Part 2 Digital certificate.pdf
-
ISO 26430-6 2009 Digital cinema (D-cinema) operations — Part 6 Auditorium security messages for intra-theater communications.pdf
-
ISO 26433 2009 Digital cinema (D-cinema) — XML data types.pdf
-
ISO 26782 2009 Anaesthetic and respiratory equipment — Spirometers intended for the measurement of time forced expired volumes in humans.pdf
-
ISO 26866 2009 Road vehicles — Brake lining friction materials — Standard wear test procedure for commercial vehicles with air brakes.pdf
-
ISO 2709 2008 Information and documentation — Format for information exchange.pdf
-
ISO 27368 2008 Analysis of blood for asphyxiant toxicants — Carbon monoxide and hydrogen cyanide.pdf
-
ISO 27467 2009 Nuclear criticality safety — Analysis of a postulated criticality accident.pdf
-
ISO 27831-1 2008 Metallic and other inorganic coatings — Cleaning and preparation of metal surfaces — Part 1 Ferrous metals and alloys.pdf
-
ISO 27895 2009 Vacuum technology — Valves — Leak test.pdf
-
ISO 28239 2008 Textile machinery — Opener and cleaner for staple fibres preparation — Vocabulary and principles of construction.pdf
-
ISO 28499-2 2009 Buffalo hides and buffalo calf skins — Part 2 Grading on the basis of mass and size.pdf
-
ISO 286-1 2010 Geometrical product specifications (GPS) — ISO code system for tolerances on linear sizes — Part 1 Basis of tolerances, deviations and fits.pdf
-
ISO 28721-3 2008 Vitreous and porcelain enamels — Glass-lined apparatus for process plants — Part 3 Thermal shock resistance.pdf
-
ISO 28927-7 2009 Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 7 Nibblers and shears.pdf
-
ISO 29042-3 2009 Safety of machinery — Evaluation of the emission of airborne hazardous substances — Part 3 Test bench method for the measurement of the emission rate of a given pollutant.pdf
-
ISO 29581-1 2009 Cement — Test methods — Part 1 Analysis by wet chemistry.pdf
-
ISO 29681 2009 Paper, board and pulps — Determination of pH of salted water extracts.pdf
-
ISO 29781 2008 Prostheses and orthoses — Factors to be included when describing physical activity of a person who has had a lower limb amputation(s) or who has a deficiency.pdf
-
ISO 29804 2009 Thermal insulation products for building applications — Determination of the tensile bond strength of the adhesive and of the base coat to the thermal insulation material.pdf
-
ISO 30000 2009 Ships and marine technology — Ship recycling management systems — Specifications for management systems for safe and environmentally sound ship recycling facilities.pdf
-
ISO 3213 2009 Polypropylene (PP) pipes — Effect of time and temperature on the expected.pdf
-
ISO 3356 2009 Milk — Determination of alkaline phosphatase.pdf
-
ISO 3382-2 2008 Acoustics — Measurement of room acoustic parameters — Part 2 Reverberation time in ordinary rooms.pdf
-
ISO 3454 2008 Hydrometry — Direct depth sounding and suspension equipment.pdf
-
ISO 3525 2008 Oil of amyris (Amyris balsamifera L.).pdf
-
ISO 369 2009 Machine tools — Symbols for indications appearing on machine tools.pdf
-
ISO 3828 2008 Shipbuilding and marine structures — Deck machinery — Vocabulary and.pdf
-
ISO 3907 2009 Hardmetals — Determination of total carbon — Gravimetric method.pdf
-
ISO 3937-2 2008 Cutter arbors with tenon drive — Part 2 Dimensions of 7 24 taper.pdf
-
ISO 4080 2009 Rubber and plastics hoses and hose assemblies — Determination of permea.pdf
-
ISO 4310 2009 Cranes — Test code and procedures.pdf
-
ISO 4395 2009 Fluid power systems and components — Cylinder piston rod end types and dimensions.pdf
-
ISO 5-1 2009 Photography and graphic technology — Density measurements — Part 1 Geometry and functional notation.pdf
-
ISO 5351 2010 Pulps — Determination of limiting viscosity number in cupri-ethylenediamine (CED) solution.pdf
-
ISO 5536 2009 Milk fat products — Determination of water content — Karl Fischer method.pdf
-
ISO 5667-15 2009 Water quality — Sampling — Part 15 Guidance on the preservation and handling of sludge and sediment samples.pdf
-
ISO 5821 2009 Resistance welding — Spot welding electrode caps.pdf
-
ISO 589 2008 Hard coal — Determination of total moisture.pdf
-
ISO 6194-4 2009 Rotary shaft lip-type seals incorporating elastomeric sealing elements — Part 4 Performance test procedures.pdf
-
ISO 6422-1 2010 Layout key for trade documents — Part 1 Paper-based documents.pdf
-
ISO 664 2008 Oilseeds — Reduction of laboratory sample to test sample.pdf
-
ISO 6814 2009 Machinery for forestry — Mobile and self-propelled machinery — Terms, definitions and classification.pdf
-
ISO 702-1 2009 Machine tools — Connecting dimensions of spindle noses and work holding chucks — Part 1 Conical connection.pdf
-
ISO 7131 2009 Earth-moving machinery — Loaders — Terminology and commercial specifications.pdf
-
ISO 7176-9 2009 Wheelchairs — Part 9 Climatic tests for electric wheelchairs.pdf
-
ISO 725 2009 ISO inch screw threads — Basic dimensions.pdf
-
ISO 7404-3 2009 Methods for the petrographic analysis of coals — Part 3 Method of determining maceral group composition.pdf
-
ISO 7573 2008 Technical product documentation — Parts lists.pdf
-
ISO 7689 2008 Aerospace — Bolts, with MJ threads, made of alloy steel, strength class 1 100 MPa — Procurement specification.pdf
-
ISO 7769 2009 Textiles — Test method for assessing the appearance of creases in fabrics after cleansing.pdf
-
ISO 7967-9 2010 Reciprocating internal combustion engines — Vocabulary of components and systems — Part 9 Control and monitoring systems.pdf
-
ISO 8116-5 2008 Textile machinery and accessories — Beams for winding — Part 5 Sectional beams for warp knitting machines.pdf
-
ISO 8196-2 2009 Milk — Definition and evaluation of the overall accuracy of alternative methods of milk analysis — Part 2 Calibration and quality control in the dairy laboratory.pdf
-
ISO 8254-1 2009 Paper and board — Measurement of specular gloss — Part 1 75 degree gloss with a converging beam, TAPPI method.pdf
-
ISO 8406 2008 Tools for moulding — Mould bases — Round locating elements and spacers.pdf
-
ISO 8536-3 2009 Infusion equipment for medical use — Part 3 Aluminium caps for infusion bottles.pdf
-
ISO 8573-1 2010 Compressed air — Part 1 Contaminants and purity classes.pdf
-
ISO 8710 2010 Motorcycles — Brakes and brake systems — Tests and measurement method.pdf
-
ISO 8729-2 2009 Ships and marine technology — Marine radar reflectors — Part 2 Active type.pdf
-
ISO 877-2 2009 Plastics — Methods of exposure to solar radiation — Part 2 Direct weathering and exposure behind window glass.pdf
-
ISO 8894-1 2010 Refractory materials — Determination of thermal conductivity — Part 1 Hot-wire methods (cross-array and resistance thermometer).pdf
-
ISO 9073-5 2008 Textiles — Test methods for nonwovens — Part 5 Determination of resistance to mechanical penetration (ball burst procedure).pdf
-
ISO 9117-2 2010 Paints and varnishes — Drying tests — Part 2 Pressure test for stackability.pdf
-
ISO 9168 2009 Dentistry — Hose connectors for air driven dental handpieces.pdf
-
ISO 9183-1 2008 Tools for pressing — Wear plates for press dies — Part 1 Type A.pdf
-
ISO 9241-302 2008 Ergonomics of human-system interaction — Part 302 Terminology for electronic visual displays.pdf
-
ISO 9244 2008 Earth-moving machinery — Machine safety labels — General principles.pdf
-
ISO 9444-1 2009 Continuously hot-rolled stainless steel — Tolerances on dimensions and form — Part 1 Narrow strip and cut lengths.pdf
-
ISO 9597 2008 Cement — Test methods — Determination of setting time and soundness.pdf
-
ISO 9650-3 2009 Small craft — Inflatable liferafts — Part 3 Materials.pdf
-
ISO 9801 2009 Ophthalmic instruments — Trial case lenses.pdf
-
ISO Guide 64 2008 Guide for addressing environmental issues in product standards.pdf
-
ISO IEC 11889-1 2009 Information technology — Trusted Platform Module — Part 1 Overview.pdf
-
ISO IEC 13560 2009 Information technology — Telecommunications and information exchange between systems — Procedure for the registration of assigned numbers for ISO IEC 26907 and ISO IEC 26908.pdf
-
ISO IEC 14476-5 2008 Information technology — Enhanced communications transport protocol Specification of N-plex multicast transport — Part 5.pdf
-
ISO IEC 14543-4-1 2008 Information technology — Home electronic system (HES) architecture — Part 4-1 Communication layers — Application layer for network enhanced control devices of HES Class 1.pdf
-
ISO IEC 14762 2009 Information technology — Functional safety requirements for Ho.pdf
-
ISO IEC 14888-1 2008 Information technology — Security techniques — Digital signatures with appendix — Part 1 General.pdf
-
ISO IEC 15424 2008 Information technology — Automatic identification and data capture techniques — Data Carrier Identifiers (including Symbology Identifiers).pdf
-
ISO IEC 17007 2009 Conformity assessment — Guidance for drafting normative documents suitable for use for conformity assessment.pdf
-
ISO IEC 19757-8 2008 Information technology — Document Schema Definition Langua.pdf
-
ISO IEC 20926 2009 Software and systems engineering — Software measurement — IFPUG functional size measurement method 2009.pdf
-
ISO IEC 23000-11 2009 Information technology — Multimedia application format (MPEG-A) — Part 11 Stereoscopic video application format.pdf
-
ISO IEC 23001-3 2008 Information technology — MPEG systems technologies — Part 3 XML IPMP messages.pdf
-
ISO IEC 24713-2 2008 Information technology — Biometric profiles for interoperability and data interchange — Part 2 Physical access control for employees at airports.pdf
-
ISO IEC 24727-4 2008 Identification cards — Integrated circuit card programming inter.pdf
-
ISO IEC 24751-2 2008 Information technology — Individualized adaptability and accessibility in e-learning, education and training — Part 2 Access for all personal needs and preferences for digital delivery.pdf
-
ISO IEC 25012 2008 Software engineering — Software product Quality Requirements and Evaluation (SQuaRE) — Data quality model.pdf
-
ISO IEC 29141 2009 Information technology — Biometrics — Tenprint capture using biometric application programming interface (BioAPI).pdf
-
ISO IEC 29341-10-10 2008 Information technology — UPnP Device Architecture — Part 10-10 Quality of Service Device Control Protocol - Quality of Service Device Service.pdf
-
ISO IEC 29341-11-2 2008 Information technology — UPnP Device Architecture — Part 11-2 Quality of Service Device Control Protocol - Level 2 - Quality of Service Schemas.pdf
-
ISO IEC 29341-6-11 2008 Information technology — UPnP Device Architecture — Part 6-11 Heating, Ventilation, and Air Conditioning Device Control Protocol - Fan Operating Mode Service.pdf
-
ISO IEC 29341-6-16 2008 Information technology — UPnP Device Architecture — Part 6-16 Heating, Ventilation, and Air Conditioning Device Control Protocol - Temperature Setpoint Service.pdf
-
ISO IEC 29341-7-1 2008 Information technology — UPnP Device Architecture — Part 7-1 Lighting Device Control Protocol - Binary Light Device.pdf
-
ISO IEC 29341-8-1 2008 Information technology — UPnP Device Architecture — Part 8-1 Internet Gateway Device Control Protocol - Internet Gateway Device.pdf
-
ISO IEC 29341-8-3 2008 Information technology — UPnP Device Architecture — Part 8-3 Internet Gateway Device Control Protocol - Wide Area Network Device.pdf
-
ISO IEC 29361 2008 Information technology — Web Services Interoperability — WS-I Basic Profile Version 1.1.pdf
-
ISO IEC 7501-1 2008 Identification cards — Machine readable travel documents — Part 1 Machine readable passport.pdf
-
ISO IEC Guide 77-2 2008 Guide for specification of product properties and classes — P.pdf
-
ISO IEC TR 18018 2010 Information technology — Systems and software engineering — Guide for configuration management tool capabilities.pdf
-
ISO IEC TR 24766 2009 Information technology — Systems and software engineering — Guide for requirements engineering tool capabilities.pdf
-
ISO IEC TR 29138-2 2009 Information technology — Accessibility considerations for people with disabilities — Part 2 Standards inventory.pdf
-
ISO IEC TR 29163-4 2009 Information technology — Sharable Content Object Reference Model (SCORM?) 2004 3rd Edition — Part 4 Sequencing and Navigation Version 1.1.pdf
-
ISO TR 10064-6 2009 Code of inspection practice — Part 6 Bevel gear measurement methods.pdf
-
ISO TR 10989 2009 Reference materials — Guidance on, and keywords used for, RM categorization.pdf
-
ISO TR 11954 2008 Fuel cell road vehicles — Maximum speed measurement.pdf
-
ISO TR 12134 2010 Rubber — Estimation of uncertainty for test methods — Non-functional para.pdf
-
ISO TR 12389 2009 Methods of testing cement — Report of a test programme — Chemical analysis by x-ray fluorescence.pdf
-
ISO TR 12773-2 2009 Business requirements for health summary records — Part 2 Environmental scan.pdf
-
ISO TR 12910 2010 Light-frame timber construction — Comparison of four national design documents.pdf
-
ISO TR 16268 2009 Surface chemical analysis — Proposed procedure for certifying the retained areic dose in a working reference material produced by ion implantation.pdf
-
2024人工智能大模型技术财务应用蓝皮书.pdf
-
2024年腾讯云智慧传媒行业数智化白皮书.pdf
-
cmac -2024中国制药企业医学信息职能白皮书.pdf
-
GA-T 1193-2014 人身损害误工期 护理期 营养期评定规范.pdf
-
GB 44496-2024 汽车软件升级通用技术要求.pdf
-
GB-T 33174-2022 资产管理 管理体系 GB-T 33173应用指南.pdf
-
GB-T 44230-2024 政务信息系统基本要求.pdf
-
GJB 10157-2021 军用可编程逻辑器件软件 Verilog语言编程安全子集.pdf
-
GJB 5714A-2023 外购产品质量监督要求.pdf
-
HB 5287-1996 金属材料轴向加载疲劳试验方法.pdf
-
IEC 60821 1991 Amd 1 1999 VMEbus — Microprocessor system bus for 1 byte to 4 byte.pdf
-
IEEE Std C57.147-2018 IEEE Guide for Acceptance and.pdf
-
ISO 9227 2022 中文版.pdf
-
ISO 10054 1998 Internal combustion compression-ignition engines — Measurement apparatus for smoke from engines operating under steady-state conditions — Filter-type smokemeter.pdf
-
ISO 10097-1 1999 Wireline diamond core drilling equipment — System A — Part 1 Metric units.pdf
-
ISO 10131-1 1997 Foldaway beds — Safety requirements and tests — Part 1 Safety requireme.pdf
-
ISO 10227 1996 Human human surrogate impact (single shock) testing and evaluation — Guidan.pdf
-
ISO 10248 1996 Fluid fertilizers — De-aeration of suspension samples by film disentrainment.pdf
-
ISO 10284 1997 Cinematography — Graphical symbols — Description.pdf
-
ISO 10301 1997 Water quality — Determination of highly volatile halogenated hydrocarbons — Gas-chromatographic methods.pdf
-
ISO 10303-502 2000 Industrial automation systems and integration — Product data representation and exchange — Part 502 Application interpreted construct Shell based wireframe.pdf
-
ISO 10303-514 1999 Industrial automation systems and integration — Product data representation and exchange — Part 514 Application interpreted construct Advanced boundary representation.pdf
-
ISO 10333-2 2000 Personal fall-arrest systems — Part 2 Lanyards and energy absorbers.pdf
-
ISO 10356 1996 Cinematography — Storage and handling of nitrate-base motion-picture.pdf
-
ISO 1042 1998 Laboratory glassware — One-mark volumetric flasks.pdf
-
ISO 10472-5 1997 Safety requirements for industrial laundry machinery — Part 5 Flatwork ironers, feeders and folders.pdf
-
ISO 105-J01 1997 Textiles — Tests for colour fastness — Part J01 General principles for meas.pdf
-
ISO 105-Z05 1996 Textiles — Tests for colour fastness — Part Z05 Determination of the dusting behaviour of dyes.pdf
-
ISO 1051 1999 Rivet shank diameters.pdf
-
ISO 10545-5 1996 Ceramic tiles — Part 5 Determination of impact resistance by measurement of coefficient of restitution.pdf
-
ISO 10585 1996 Information and documentation — Armenian alphabet coded character set for bibliographic information interchange.pdf
-
ISO 10599-2 1997 Car radios — Coaxial aerial connectors — Part 2 Characteristic values, performance requirements and tests.pdf
-
ISO 10624 1998 Oil of elemi (Canarium luzonicum Miq.).pdf
站内资源均来自网友分享或网络收集整理,若无意中侵犯到您的权利,敬请联系我们
微信(点击查看客服),我们将及时删除相关资源。