BSEN60832-2:2010 BSl Standards Publication Licensedcopy:IPLogin,UniversityofOxford,Versioncorrectasof Live working Insulating sticks and attachable devices Part 2: Attachable devices NOCOPYINGWITHOUTBSIPERMISSIONEXCEPTASPERMITTEDBYCOPYRIGHTLAW BSi raising standards worldwide" BS EN 60832-2:2010 EUROPEANSTANDARD EN 60832-2 NORME EUROPEENNE EUROPAISCHENORM March2010 ICS 13.260; 29.240.20. Supersedes EN 60832:1996 (partially) English version Live working , Version correct as of 08/09/2018 Insulatingsticksandattachabledevices Part 2: Attachable devices (IEC 60832-2:2010) Arbeiten unter Spannung Travauxsoustension- Perches isolantes et outils adaptables - IsolierendeStangenundauswechselbare Partie2:Outilsadaptables Adapter/Arbeitskopfe (CEI60832-2:2010) Teil2:Auswechselbare Adapter/Arbeitskopfe (IEC60832-2:2010) This European Standard was approved by CENELEC on 2010-03-01.CENELEC members are bound to comply the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. CENELEC EuropeanCommitteeforElectrotechnical Standardization Comite Europeen de Normalisation Electrotechnique Europaisches Komiteefur Elektrotechnische Normung CentralSecretariat:AvenueMarnix17,B-1000Brussels @2010CENELEC- All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 60832-2:2010 E BSEN60832-2:2010 EN60832-2:2010 Foreword The text of document 78/839/FDIS, future edition 1 of IEC 60832-2, prepared by IEC TC 78, Live working, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60832-2 on 2010-03-01. This EN 60832-2, together with EN 60832-1, supersedes EN 60832:1996. The two parts have been universaldevices. , Version correct as of 08/09/2018 Compared to EN 60832, the major changes included in EN 60832-2 are: updating of the list of devices; clarifying the applicability of the document to other attachment system than splined end-fitting; application of conformity assessmentfor products having completed the production phase, according alternative testing in case of production follow-up. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent rights. The following dates were fixed: latest date by which the EN has to be implemented at national level bypublication of an identical (dop) 2010-12-01 nationalstandardorbyendorsement latest date by which the national standards conflicting - with the EN have to be withdrawn (dow) 2013-03-01 Annex ZA has been added by CENELEC Endorsement notice The text of the International Standard IEC 60832-2:2010 was approved by CENELEC as a European Standard without any modification.