EUROPEAN STANDARD EN 60684-3-272 NORME EUROPEENNE August 1998 EUROPAISCHE NORM ICS 29.035.01 Descriptors: Solid electrical insulating materials, protection sleevings, heat-shrinkable materials, elastomer, flexible conductors, individual specifications, designation, dimensions, mass, characteristics, tables of data, breakdown voltage English version Flexible insulating sleeving Part 3: Specifications for individual types of sleeving Sheet 272: Heat-shrinkable elastomer sleeving, flame retarded, fluid resistant, shrink ratio 2 : 1, thin wall (IEC 60684-3-272:1998) Gaines isolantes souples Isolierschlauche Partie 3: Spécifications pour types Teil 3: Anforderungen fur einzelne Schlauchtypen particuliers de gaines Feuille 272: Gaines thermorétractables en Blatt 272: Warmeschrumpfende élastomere, retardées a la flamme, résistant Elastomerschlauche, flammwidrig, aux fluides, rapport de retreint 2 : 1, paroi flussigkeitsbestandig, Schrumpfverhaltnis 2 : 1, dunnwandig mince (CEI 60684-3-272:1998) (IEC 60684-3-272:1998) This European Standard was approved by CENELEC on 1998-08-01 CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europaisches Komitee fur Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B-1050 Brussels CENELEC members. Ref. No. EN 60684-3-272:1998 E EN 60684-3-272:1998 Foreword The text of document 15C/961/FDIS, future edition 1 of IEC 60684-3-272, prepared by SC 15C, Specifications, of IEC TC 15, Insulating materials, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60684-3-272 on 1998-08-01. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by (dop) 1999-05-01 endorsement latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2001-05-01 Annexes designated “normative" are part of the body of the standard. In this standard, Annex ZA is normative. Annex ZA has been added by CENELEC. Endorsement notice The text of the International Standard IEC 60684-3-272:1998 was approved by CENELEC as a European Standard without any modification. 2 EN 60684-3-272:1998 Introduction This International Standard is one of a series which deals with flexible insulating sleeving for electrical purposes The series consists of three parts: Part 1: Definitions and general requirements (IEC 60684-1); -Part 2: Methods of test (IEC 60684-2); Part 3: Specifications for individual types of sleeving (IEC 60684-3). This standard contains one of the sheets comprising part 3, as follows: Sheet272:Heat-shrinkableelastomer sleeving,flameretarded,fluidresistant,shrinkratio 2:1,thinwall 1 Scope This sheet of IEC 60684-3 gives the requirements for one type of heat-shrinkable, flame retarded, fluid resistant, elastomer sleeving with a temperature index of 120 and a nominal shrink ratio of 2 : 1. This sleeving is normally supplied with internal diameter up to 51 mm and the standard colour is black. Sizes or colours