ISO INTERNATIONAL STANDARD 10131-1 First edition 1997-08-01 Foldaway beds - Safety requirements and tests -- Part 1: Safety requirements Lits rabattables Exigences de seécurite et essais - Partie 1: Exigences de sécurité ISO Reference number ISO 10131-1:1997(E) No reproduction or networking permitted without license from IHS Not for Resale ISO 10131-1:1997(E) Foreword Iso (the International Organization for Standardization) is a worldwide federation of national standards bodies (IsO member bodies). The work of preparing International Standards is normally carried out through Iso technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non- governmental, in liaison with so, also take part in the work. Iso collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. International Standard ISO 10131-1 was prepared by Technical Committee ISO/TC 136, Furniture, Subcommittee SC 5, Domestic furniture. Is 10131 consists of the following parts, under the general title Foldaway beds Safety requirements and tests: Part 1: Safety requirements Part 2: Test methods Annex A forms an integral part of this part of ISO 10131. Annex B is for information only. @ISO1997 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or microfilm, without permission in writing from the publisher. International Organization for Standardization Casepostale56·CH-1211Geneve20·Switzerland Internet [email protected] X.400 C=ch; a=400net; p=iso; 0=isocs; S=central Printed in Switzerland Not for Resale @ISO ISO 10131-1:1997(E) Introduction Since the mounting of the bed structure to the building structure is of critical importance with foldaway beds, this part of isO 10131 includes requirements for the safety of wall attachments. In annex B, the requirements are shown schematically in relation to the test procedures. ili Not for Resale